Cutting French fries with hands can be grueling and time-consuming. Moreover, they come out in different sizes. The French fry cutter helps people get perfect chips, but it requires strength, and the cutter moves when you put pressure on it.
Therefore, you need to switch to wall-mounted potato cutters. These cutters are attached to the wall, and you don’t need to put too much pressure while using them. You can cut any vegetable easily within no time by using this cutter.
If you want to make lots of French fries or cut vegetables quickly, this wall-mounted potato cutter is perfect. It is designed for restaurant use, and it takes less than ten seconds to cut an entire piece of vegetable.
Our Pick: New Star 7006872 French Fry Cutter
Wall-mounted potato cutters are what the name suggests. It is a potato or vegetable cutter that is mounted on the wall.
New Star Wall Mount Fry Cutter is one of the best available potato cutters in the market. It is sturdy but easy to use to get the perfect French fries.
The attachment to the wall gives this cutter more stability, and you can easily cut your vegetables with little strength. It comes with wall-securing brackets. This potato cutter is made of durable and sturdy cast iron, and the body is aluminum.
The rest of the parts are made of stainless steel with a small handle to make sure you don’t have to push too hard to cut your vegetables. The secured feature makes it a hassle-free product, and you can just put your vegetable or potato vertically to get perfectly 3/8-inch pieces.
How to Use New Star Wall Mounted Potato Cutter?
Before using wall-mounted cutters, you need to secure them on the wall. New Star potato cutters come with wall mounting brackets, but the screws aren’t provided. You need to attach the brackets to the wall tightly. You can use the cutter without the racks as you can remove them.
To assemble the remaining components, you must remove them and wipe them down. Set it up according to the manual. Ensure that the cutter is stable when mounted before using it. After the assembly, put in the blade you want to use.
Then take the potatoes or your preferred vegetable and place it vertically between the pusher and cutter. Since New Star’s pedal is short and sturdy, you don’t have to put too much pressure while pushing. With just a bit of pressure, you can get perfect French fries.
Why Use New Star Wall Mounted Potato Cutter?
Potato cutters are famous, but most of them are manual. Wall-mounted cutters are more secure than manual ones because the wall brackets provide more stability. The biggest problem with these is that they are hard to keep in one place when used, but you don’t have to worry about that with this product.
The New Star potato cutter is made of stainless steel, which means the blades won’t rust when the juice of potato, tomato, or other vegetables touches the cutter. Plus, the base made of aluminum is durable and will last you after years of use.
Moreover, you can save energy and time while using a wall-mounted potato cutter. Manually cutting each piece or using a manual cutter takes strength and time that most people can’t spare. But with a wall-mounted cutter, you don’t have to put too much effort into pushing through the nicely cut fries.
Tips on Using a Wall-Mounted Potato Cutter
Don’t Use Much Force:
Wall-mounted potato cutters need less pressure than tabletop cutters because they are attached to the wall. Don’t put too much strength while cutting the vegetables because you might push too hard and hurt yourself.
This product puts a lot of pressure on your wall, so ensure that the brackets are correctly installed. Since it doesn’t come with screws, use new screws for attachment, not rusty old ones. As you can remove the cutter from the brackets, ensure the cutter is nicely secured when using the wall mounting feature.
Don’t Touch Blades:
The blades should never be handled with bare hands—not even when cleaning them. Position your vegetables carefully. Don’t let children come near the cutter.
Related Article: All-purpose French Fry Cutters
French Fry Cutter Cleaning and Care Instructions
Like the New Star Wall Mounted Potato Cutter, other French Fry cutters need to be washed after use. When you want to clean the blade, push the mold out from the block and clean it. It is also necessary to clean the push block. Wash the cutter with mild dish soap and use a soft bristle brush to clean.
If you are cutting several vegetables, wipe down the cutter after each use. It is best to hand wash potato cutters as many are not dishwasher friendly. Sanitizing is important because you will use different vegetables and can’t risk cross-contamination.
When cleaning, you do not have to remove the handles. However, to avoid oiliness, wipe it down it dish soap occasionally. You should clean your cutter with brushes instead of your fingers, even though hand cleaning is suggested. The blades are very sharp, and accidents can occur from the slightest touch.
How to Sharpen the Blades of a French Fry Cutter
It is generally not advisable to sharpen the blades of a French fry cutter. Most people tend to buy new blades rather than sharpen the old ones. The design of the cutter makes it harder to handle and sharp. It is natural for blades to become blunt after some time.
If you want to sharpen your French fry cutter blades, you can use honing and diamond steels. For maintaining peak sharpness, it’s best to use honing steels once a week. Hold the steel to the blade at a 20o angle to hone the blade. Wiping down the blades regularly helps maintain sharpness.
If your blade has gone dull, you need to use diamond steel. Honing steels won’t bring back blunt blades to sharp. The procedure is similar. Diamond and honing steels are standard kitchen accessories, but you can buy them with knife sets if you don’t have them.
How To Replace Blades on A French Fry Cutter
It’s best to take precautions before you replace the blades. New Star Wall Mounted Potato Cutter comes with 3/8-inch blades and provides a ¼ inch replacement blade. Unscrew the head screws of the blade guard and take off the top plate. After that, rotate the bottom plate and knock the sides to take the blade off.
After the blades have come out, put back the bottom plate. There are two blades: one blade has a sharp edge and slits on two different sides, and the other has them on the same side. Put two-blade ones on one side of the bottom plate with the slit side up.
It is also essential to do the same on the opposite side. When placing blade two, place it opposite, but the slits need to be down. The blades need to look like a check pattern. Put the top plate back on after placing it. If you don’t want to replace the blades yourself, buying blades with a grid is good.
I hope you get all the information about French Fry Cutter and the wall-mounted cutter. The New Star French fry cutter is an all-rounder that works well in any kitchen, whether at home or at a restaurant. Be careful while placing and cutting your vegetables, and don’t forget to wipe them daily.